Post by s54smg2 on Jun 17, 2014 10:29:34 GMT -5
e46 m3 diy
Salmon Relay
Parts & Tools:
Turner Motorsport Salmon Relay
Real OEM Diagram
-1 replacement relay- OEM Part Number- 12631742690 (not a bad idea to pick up an extra to keep in the glove box/ *dont forget to keep a torx 25 in the car too or the extra relay will do nothing for you
)
-torx 25
Step1:
-located at the back right side of your engine bay next to your brake reservoir remove 4 torx25 screws
-be mindful of the hose clip on the front left screw. The torx screw holds this on as well.
-Remove the relay. Notice the direction of the relay installed with the numbers on top of the part facing the firewall/driver seat. Be sure to re install the same way.
SMG Salmon Relay:
Disclaimer: Do this procedure at your own risk! This is offered for reference only. I disclaim all liability for direct, indirect, incidental, or consequential damages or injuries that result from the use of any of these examples, instructions, or other information.
Salmon RelayParts & Tools:
Turner Motorsport Salmon Relay
Real OEM Diagram
-1 replacement relay- OEM Part Number- 12631742690 (not a bad idea to pick up an extra to keep in the glove box/ *dont forget to keep a torx 25 in the car too or the extra relay will do nothing for you
)-torx 25
Step1:
-located at the back right side of your engine bay next to your brake reservoir remove 4 torx25 screws
-be mindful of the hose clip on the front left screw. The torx screw holds this on as well.
-Remove the relay. Notice the direction of the relay installed with the numbers on top of the part facing the firewall/driver seat. Be sure to re install the same way.
SMG Salmon Relay:
Disclaimer: Do this procedure at your own risk! This is offered for reference only. I disclaim all liability for direct, indirect, incidental, or consequential damages or injuries that result from the use of any of these examples, instructions, or other information.