Post by s54smg2 on Jun 12, 2013 23:52:11 GMT -5
e46 m3 diy
VANOS Filter
Parts & Tools:
SHOP
VANOS Filter Kit
-vanos filter BMW
-vanos upper o-ring part
-vanos lower o-ring part
-3/8 socket driver
-22mm socket
-needle nose pliers
-torque wrench
Step1:
-remove 22mm pressure valve/vanos filter
Step2:
-replace filter and o-rings.
-use needle nose pliers and pull the dirty filter strait off from the end. snap the new one on
-I cut the old o-rings to get them off the easiest. Use caution when cutting.
-replace o-rings
Step3:
-install pressure valve/VANOS filter and torque to 20ft.lbs
Disclaimer: Do this procedure at your own risk! This is offered for reference only. I disclaim all liability for direct, indirect, incidental, or consequential damages or injuries that result from the use of any of these examples, instructions, or other information.
VANOS Filter
Parts & Tools:
SHOP
VANOS Filter Kit-vanos filter BMW
-vanos upper o-ring part
-vanos lower o-ring part
-3/8 socket driver
-22mm socket
-needle nose pliers
-torque wrench
Step1:
-remove 22mm pressure valve/vanos filter
Step2:
-replace filter and o-rings.
-use needle nose pliers and pull the dirty filter strait off from the end. snap the new one on
-I cut the old o-rings to get them off the easiest. Use caution when cutting.
-replace o-rings
Step3:
-install pressure valve/VANOS filter and torque to 20ft.lbs
Disclaimer: Do this procedure at your own risk! This is offered for reference only. I disclaim all liability for direct, indirect, incidental, or consequential damages or injuries that result from the use of any of these examples, instructions, or other information.
